Table of Contents
Advertisement
English
3-3. CAL Switch Function
The most suitable display mode is available by switching the mode switch on the control
panel.
The <Brightness> settings can be adjusted on the CAL Switch menu.
CAL Switch Modes
Mode
1-DICOM
2-Native
3-CAL
* All modes can be calibrated independently.
The mode name can also be changed using the calibration kit (see Optional, p. 34).
How to use the CAL Switch Function
[Entering the CAL Switch menu]
Touch the mode switch.
[Selecting the CAL Switch mode]
Touch the mode switch while the CAL Switch menu is displayed.
Touching the mode switch allows you to select the following mode.
1-DICOM → 2-Navive → 3-CAL → 1-DICOM
[Making brightness adjustments in CAL Switch mode]
(1) Touch the mode switch.
(2) Adjust the brightness value with the Left and Right directing switches.
[Closing the CAL Switch menu]
Touch the enter switch.
NOTE
• The ScreenManager menu and CAL Switch menu cannot be displayed at the same
time.
• When switching between modes, the monitor can be set to display only the specified
modes, skipping any unnecessary modes. (see p.20 Mode Preset Function
<Setup>-<Mode Preset>)
22
3. ADJUSTMET & SETTINGS
Select this option to display images in the DICOM mode (see p.
36).
Select this option to display images using the native
characteristics of the monitor panel.
Used for monitor calibration
Description
CAL Switch mode
Brightness
CAL Switch menu
Advertisement
Table of Contents
