Sherwood NewCastle R-772 Operating Instructions Manual page 8

R-772(A) 2007.8.16 5:21 PM 페이지 8
3.
CONNECTING AUDIO COMPONENTS
• For analog audio recording, the
ROOM 2 OUT jacks can be connected
to audio recording equipment such as
a tape deck, an MD recorder, etc. as
shown beside.
4.
CONNECTING EXTERNAL INS
• Use these jacks to connect the corresponding outputs
of a DVD player or external decorder, etc. that has 6,
7 or 8 channel analog audio outputs.
• In case of 6 or 7 channel outputs, do not connect both
of the SURROUND BACK L and R inputs or the
SURROUND BACK R input of this unit. (For details,
refer to the operating instructions of the component to
be connected.)
5.
CONNECTING XM (only for North America)
• Connect the XM terminal to the XM Mini-Tuner system (sold
separately).
• Position the XM Mini-Tuner system near a south-facing
window to receive the best signal.
When making connections, also refer to the operating
instructions of the XM Mini-Tuner system.
• For the best reception, check the signal strength of the XM radio
signal with using signal strength display mode, then adjust the
position of the XM Mini-Tuner system until "GOOD" is displayed.
(For details, refer to "Displaying XM information" on page 42.)
• To listen to XM Satellite Radio, refer to "XM Satellite Radio
(only for North America)" on page 40.
8