Sherwood NewCastle R-772 Operating Instructions Manual page 37

R-772(A) 2007.8.16 5:21 PM 페이지 37
Memorizing the adjusted channel levels
• You can memorize the adjusted channel levels into
preset memory("REF 1", "REF 2") and recall the
memorized whenever you want.
1.
After performing the steps 1 ~ 4 in "Adjusting the
current channel level" procedure on page 36,
press the (MEMORY/) ENTER button.
• The "1" of "REF 1" indication flickers for several
seconds.
2.
Select the desired one of REF 1 and REF 2.
• If the preset memory disappears, perform the
above step 1 again.
3.
Confirm your selection.
• The adjusted channel levels have now been
memorized into the selected memory.
Recalling the memorized channel levels
1.
Press the CHANNEL LEVEL button.
• "REF 1" (or "CAL") is displayed for several
seconds.
• If the channel level mode display disappears,
press this button again.
2.
Select the desired one of REF 1 and REF 2.
• Then the channel levels memorized into the
selected preset memory are recalled.
37