Recording - Sherwood NewCastle R-772 Operating Instructions Manual

R-772(A) 2007.8.16 5:21 PM 페이지 45

RECORDING

• The analog signals from the EXTERNAL INs as well as the digital signals from the coaxial or optical digital input can be
heard but cannot be recorded.
• When recording the analog signals from CD, AUX, VIDEO 1 ~ 4, be sure to select the "ANALOG" for the AUDIO MODE.
(For details, refer to "When selecting the AUDIO MODE" on page 54.)
• The volume and tone (bass, treble) settings have no effect on the recording signals.
Recording with TAPE
• To record the analog signals onto the recording
equipment, be sure to connect the ROOM2 OUT
jacks to the recording equipment. (For details,
refer to "CONNECTING AUDIO COMPONENTS"
on page 8.)
1.
Select the desired input as a recording source
except for TAPE.
2.
Turn on the ROOM 2.
3.
Select the MAIN as a ROOM 2 input.
4.
Start recording on the TAPE.
5.
Start play on the desired input.
Dubbing the audio and video signals
separately onto VIDEO 1
Example: When dubbing the VIDEO 2 video signal and
the CD audio signal separately onto VIDEO 1.
1.
Select VIDEO 2 as a video recording source.
2.
Select CD as an audio recording source.
3.
Start recording on the VIDEO 1.
4.
Start play on the VIDEO 2 and the CD
respectively.
• The audio signal from the CD and the video
signal from the VIDEO 2 will be dubbed and you
can enjoy them on the TV set and from the
speakers.
�Note : Be sure to observe the order of the above
steps 1 and 2.
45