Sherwood NewCastle R-772 Operating Instructions Manual page 56

R-772(A) 2007.8.16 5:21 PM 페이지 56
When selecting the NAME
• You can give names to the input sources other than
tuner.
• Up to 7 characters can be entered for each name.
1.
Press the CURSOR UP(▲)/DOWN(▼) buttons
to select the desired input source, then press
the ENTER button.
Example: When selecting the VIDEO 1
2.
Press the CURSOR UP(▲)/DOWN(▼) buttons
to select the NAME, then press the ENTER
button.
• The first digit flickers.
3.
Press the CURSOR LEFT(◀)/ RIGHT(▶)
buttons to select the desired digit.
• Then the selected digit will flicker.
4.
Press the CURSOR UP(▲)/DOWN(▼) buttons
to enter the desired character on the flickering
digit.
• You can enter the desired among blank, A ~ Z,
a ~ z, 0 ~ 9, (, ), �, +, , , -, ., /.
5.
Repeat the above steps 3 and 4 to enter the
desired characters on the rest of the digits.
6.
Confirm your entry.
• The name is stored in the memory.
■To resume its factory input source name.
• Make a blank on each digit and press the ENTER
button.
56