Room 2 Remote Controls; Remote Control Operation Range; Loading Battery - Sherwood NewCastle R-772 Operating Instructions Manual

R-772(A) 2007.8.16 5:21 PM 페이지 29

ROOM 2 Remote Controls

This remote control unit is an additional remote control unit for the ROOM 2 source playback only.
• You can use the ROOM 2 functions with this remote control unit more conveniently in another room than with
the universal remote control unit.
• For details on ROOM 2 operation, refer to "ROOM 2 SOURCE PLAYBACK" on page 44.

LOADING BATTERY

1.
Remove the cover.

REMOTE CONTROL OPERATION RANGE

• Aim the ROOM 2 remote control at the IR
receiver installed in another room.(For details,
refer to "CONNECTING MULTI-ROOM SYSTEM
KIT" on page 13.)
• When you operate the ROOM 2 function in the
main room, aim the ROOM 2 remote control at
the remote sensor of this receiver.
2.
Load the battery(CR2025) matching the polarity.
• Remove the battery when it is not used for a long
time.
29