Sherwood NewCastle R-772 Operating Instructions Manual page 16

R-772(A) 2007.8.16 5:21 PM 페이지 16
� � SETUP MIC JACK
• To use Auto Setup function, connect the supplied
microphone to the SETUP MIC jack.(For details, refer
to "When selecting the AUTO SETUP" on page 57.)
�
Notes:
• Because the microphone for Auto Setup is designed
for use with this receiver, do not use a microphone
other than the one supplied with this receiver.
• After you have completed the auto setup procedure,
disconnect the microphone.
� � AUX IN JACK
• The AUX IN jack can be connected to an additional
audio component such as an MP3 player, etc.
Note :
� �
• When connecting this jack to an MP3 player, etc., you
should use the stereo mini cord, not a mono mini cord.
�VIDEO 4 IN JACKS
• The VIDEO 4 IN jacks may be also
connected to an additional video
component such as a camcorder,
a video game player, etc.
16