Sherwood NewCastle R-772 Operating Instructions Manual page 69

R-772(A) 2007.8.16 5:21 PM 페이지 69
When selecting the DOLBY VIRTUAL SPEAKER
• You can select the speaker layout to be used actually for each Dolby Virtual Speaker mode.
�Note:
• The speaker layout settings are valid only when listening in a Dolby Virtual Speaker mode.
1.
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the DOLBY VIRTUAL SPEAKER, then press the
ENTER button.
2.
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired Dolby Virtual Speaker mode.
3.
Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to select the desired speaker layout.
�Note:
• When the speakers are set to "NO", the corresponding speaker layouts cannot be selected.
4.
Repeat the above steps 2 and 3 to select the desired speaker layout for another Dolby Virtual Speaker
mode.
�When selecting the Dolby Virtual Speaker Reference mode
2 SPK : When using 2 front speakers only.
3 SPK : When using 2 front and center speakers.
�When selecting the Dolby Virtual Speaker Wide mode
2 SPK : When using 2 front speakers only.
3 SPK : When using 2 front and center speakers.
4 SPK : When using 2 front and 2 surround speakers.
5 SPK : When using 2 front, center and 2 surround speakers.
69