Setting The Operation Of The Ctl Pedal (Ctl Pedal Function); Setting The Operation Of The Exp Pedal Switch (Exp Switch Function); Setting The Operation Of The Exp Pedal (Exp Pedal Function) - Roland GT-8 Owner's Manual

Chapter 5 Using Pedals to Control the Effects
Setting the Operation of the CTL
Pedal (CTL Pedal Function)
Setting the Operation of the EXP
Pedal Switch (EXP Switch Function)
This applies the functions of the CTL pedal and EXP pedal
switch globally to the GT-8.
fig.05-009
1. Press [SYSTEM], then press PARAMETER [
[ ] so that "CTL PDL Func" (CTL pedal) or "EXP
SW Func" (EXP pedal switch) is displayed.
fig.05-010d
2. Use the PATCH/VALUE dial to select the controller
function.
3. Press [EXIT] to return to the Play screen.
Value Explanation
The pedal functions as the type of controller
Assignable
set with Assign (p. 56, p. 57) in each individ-
ual patch.
Preamp Ch A/B
Switches between Preamp channel A and B.
Solo On/Off Switches the Preamp SOLO on and off.
FX-1 On/Off Switches the FX-1 on and off.
Comp On/Off
Switches the COMP on and off.
Wah On/Off
Switches the WAH on and off.
Loop On/Off
Switches the LOOP on and off.
Switches the OVERDRIVE/DISTORTION
OD/DS On/Off
on and off.
Switches the PREAMP/SPEAKER on and
Preamp On/Off
off.
EQ On/Off
Switches the EQ on and off.
FX-2 On/Off Switches the FX-2 on and off.
Delay On/Off
Switches the DELAY on and off.
54
1 2
3 1
]
Setting the Operation of the
EXP Pedal (EXP Pedal Function)
This determines the function of the EXP pedal that applies
globally to the GT-8.
fig.05-009
1. Press [SYSTEM], then press PARAMETER [
fig.05-020d
2. Use the PATCH/VALUE dial to select the EXP pedal function.
Value Explanation
Chorus On/Off Switches the CHORUS on and off.
Reverb On/Off
Switches the REVERB on and off.
Amp Ctl On/Off
Switches the AMP CTL on and off.
MANUAL On/Off
Switches the MANUAL on and off.
TUNER On/Off
Switches the TUNER/BYPASS on and off.
Master BPM (TAP) Used for tap input of the Master BPM.
Delay Time (TAP)
Used for tap input of the delay time.
Controls the Start/Stop of external MIDI de-
MIDI Start/Stop
vices (such as sequencers).
Controls the Play/Stop of external MIDI de-
MMC Play/Stop
vices (such as hard disk recorders).
Patch Level Inc1
Increases the patch volume level by 10 units.
Patch Level Inc2
Increases the patch volume level by 20 units.
Patch Level Dec1
Decreases the patch volume level by 10 units.
Patch Level Dec2 Decreases the patch volume level by 20 units.
When "Hold" (p. 30) is selected for the DELAY
Hold Delay Stop
type, the performance is instantly stopped.
Switches the preamp SOLO, for both chan-
nel A and B, on and off.
Solo A&B On/Off
* If one of the two channels is off, both will be
turned on.
Switches to the next higher patch number in
Patch Num. Inc
the same bank as the currently selected patch.
Switches to the next lower patch number in
Patch Num. Dec
the same bank as the currently selected patch.
Patch Bank Inc
Switches to the next higher bank number.
Patch Bank Dec
Switches to the next lower bank number.
[ ] so that "EXP PDL Func" is displayed.
1 2
3 1
]