Adjusting The Display Contrast (Lcd Contrast); Adjusting The Tone To Suit The Guitar Being Used - Roland GT-8 Owner's Manual

Chapter 7 Other Features
Adjusting the Display
Contrast (LCD Contrast)
Depending on where the GT-8 is placed, the display (on the
right) may become difficult to read. If this occurs, adjust the
display contrast.
fig.07-151
1. Press [SYSTEM], then press PARAMETER [
[ ] so that "SYS: LCD Contrast" is displayed.
fig.07-160d
2. Rotate the PATCH/VALUE dial to adjust the contrast.
Valid Settings: 1–16
3. Press [EXIT] to return to the Play screen.
70
Adjusting the Tone to Suit
the Guitar Being Used
The GT-8 includes a function used for adjusting the tone to
match the connected guitar.
This is effective when you are connecting a different guitar
from the one used when the patch was created.
1 2
fig.07-041
3 1
]
1. Press [SYSTEM], then press PARAMETER [
fig.07-050d
2. Rotate the PATCH/VALUE dial to change the setting's
3. Repeat Steps 1 and 2 as needed.
4. Press [EXIT] to return to the Play screen.
When adjusting the input level and input presence, the
input signals for all patches are affected. Note that the
nuances of the effect sounds that occur in response to
guitar volume may change, particularly with patches in
which effects are controlled by the guitar volume.
[ ] to display the following screen.
value.
Parameter/
Explanation
Range
Input Level
-20 dB–+20 dB Adjusts the guitar input level.
Input Pres. (Input Presence)
Adjusts the tonal quality of the guitar's high
-20 dB–+20 dB
end.
1 2
4 1
]