Customizing Pedal Wah - Roland GT-8 Owner's Manual

Chapter 6 Creating Original Effects Types (Customize)

Customizing Pedal Wah

You can make three different sets of settings, Custom 1,
Custom 2, and Custom 3.
The sound of any patch that uses Custom 1, 2, or 3 will be
altered if the custom settings are edited.
fig.06-065
1. Press [WAH] to display the Pedal Wah edit screen.
2. Press PARAMETER [
parameter.
3. Rotate the PATCH/VALUE dial to call up "Custom 1,"
"Custom 2," or "Custom 3."
fig.06-070d
4. Press PARAMETER [
parameters.
5. Rotate the PATCH/VALUE dial to change the setting's
value.
6. Repeat Steps 4 and 5 as needed.
7. Press [EXIT] to return to the Play screen.
66
2,4 3,5
1 7
] [ ] to call up the "Type"
] [ ] to show the custom
Parameter/
Explanation
Range
Type
fig.06-080d
see below Selects the basic type of wah.
This models the sound of the CRY BABY
CRY WAH
wah pedal popular in the `70s.
VO WAH This models the sound of the VOX V846.
Fat WAH
This a wah sound featuring a bold tone.
Light WAH
This wah has a refined smooth sound.
Wah featuring a broader range of variations
7String WAH
for the seven-string guitar.
Q
fig.06-081d
Adjusts the amount of characteristic effect
-50–+50
applied to the wah tone.
Range Low
fig.06-082d
Selects the tone produced when the pedal is
-50–+50
back.
Range High
fig.06-083d
Selects the tone produced when the pedal is
-50–+50
forward.
Presence
fig.06-084d
-50–+50 Adjusts the tonal quality of the wah effect.