Setting The Limiter/Agc Switch Function - Roland R-09HR Owner's Manual

R-09HR configuration settings

Setting the LIMITER/AGC switch function

(Limiter/AGC)
Sets whether LIMITER or AGC (Auto Gain Control) is turned on/off with the LIMITER/
AGC switch on the back.
The limiter is a feature that controls distortion by compressing input levels to an
appropriate level when the input sound is too loud.
AGC (Auto Gain Control) keeps the overall sound level even during recording by
increasing levels when input sound is low and attenuating them when input is high.
Set to AGC to record voices of people both near and far at the same volume, such
as during meetings.
fig.inputsetting-e.eps_80
1.
Select "Input Setup" from the <Menu
Screen>.
Use the [PLAY Button
"Input Setup," then press the [REC Button].
fig.inputsetting-e.eps_80
2.
Select "Limiter/AGC."
Use the [PLAY Button
the cursor to the Limiter/AGC line.
fig.inputsetting-e.eps_80
3.
Set the [LIMITER/AGC switch] function.
Use the [PREV button
the Limiter/AGC value.
Setting
When finished with the settings, press the [MENU button] to return
to the previous screens, in order.
106
] and [STOP Button
] and [STOP Button
] and [NEXT button
Limiter
AGC (Auto Gain Control)
] to select
Move the
cursor
up or down
] to move
Move the
cursor
up or down
] to change
Change
the value
Enter