Turning The Effect On And Off; Setting The Effects Simply (Quick Fx) - Roland GT-8 Owner's Manual

Chapter 2 Creating Your Own Favorite Tones (Patches)

Turning the Effect On and Off

The GT-8's internal effects are switched on and off with
button controls. The indicator for an effect's ON/OFF button
lights up when the effect is enabled.
fig.02-090
1,2,3
1. Press the ON/OFF button for the effect you want to be
able to switch on and off.
The settings for the selected effect appear in the display.
* With FX-1 and FX-2, the settings for the currently selected
effect are shown.
fig.02-100d
2. Press the ON/OFF button again to switch the effect on
or off.
The effect name flashes in the display when that effect is
disabled.
3. To select another effect to be switched on and off,
repeat Steps 1 and 2.
4. Press [EXIT] to return to the Play screen.
5. If you want to save a tone with the settings you've
made, proceed as described in "Storing Patches (Patch
Write)" (p. 22).
* If you want to name the patch or edit the name, proceed to
"Naming Patches (Patch Name)" (p. 21) before you save.
18
Setting the Effects Simply
(QUICK FX)
Each effect includes prepared sample settings called "Quick
Settings."
You can easily create new effect sounds just by selecting and
combining these Quick Settings.
fig.02-101
4
1. Press the on/off button for the effect with the settings
you want to change.
The parameters for the selected effect appear in the
display.
During editing, the most recently edited parameter
appears.
2. Press PARAMETER [
select screen appears in the display.
fig.02-110d
3. Rotate the PATCH/VALUE dial to select the Quick
Setting you want.
U**:
P**:
* "---: User Setting" indicates that the effect indicated in the
upper row of the display is set to be saved to the currently
selected patch, or that the settings are currently being
modified.
* When FX-1 or FX-2 has been selected in Step 1, the settings
for the effect selected by means of the FX1/FX2 Select
parameter (refer to the following item) are switched.
* When Preamp/Speaker has been selected in Step 1, you can
choose different type of settings for channel A and B.
1
] so that the Quick Setting
User Quick Setting (p. 24)
Preset Quick Setting
3
4 2