Adjusting The Overall Sound To Match The Usage Environment (Global) - Roland GT-8 Owner's Manual

Chapter 7 Other Features
5. Rotate the PATCH/VALUE dial to select "Input Level."
fig.07-0561d
6. Press PARAMETER [
Sens."
fig.07-057d
7. Rotate the PATCH/VALUE dial to change the setting's
value.
Play the guitar at various volumes and adjust the Input
Sens as you listen to the sound to confirm how the
parameter set in Step 1 changes.
8. Press [EXIT] to return to the Play screen.
You may be unable to change parameter settings when
the following functions are set for the Assign target (p.
60) while INPUT LEVEL is selected for the Assign source
(p. 59).
• TUNER On/Off
• MANUAL On/Off
• Patch Num. Inc
• Patch Num. Dec
• Patch Bank Inc
• Patch Bank Dec
Note that if you inadvertently happen to make this type
of setting, there is no way to return the patch to its
normal state other than overwriting and saving.
68
] [ ] to display "Input
Adjusting the Overall Sound to Match
the Usage Environment (Global)
The GT-8 includes a feature that allows you to change the
overall tone temporarily. This is called the "Global function."
With the Global function, you can temporarily change your
settings to match those of your equipment and the operating
environment, while leaving the settings in the patches
untouched.
fig.07-031
1. Press [OUTPUT SELECT], then press PARAMETER
[ ] [ ] so that the Global setting screen.
fig.07-040d
(Example)
2. Rotate the PATCH/VALUE dial to change the setting's
value.
3. Repeat Steps 1 and 2 as needed.
4. Press [EXIT] to return to the Play screen.
1 2
4 1