Rear Panel - Roland GT-8 Owner's Manual

Names of Things and What They Do

Rear Panel

fig.002-020
1.
INPUT Jack
The guitar is connected here.
2.
OUTPUT LEVEL Knob
Adjusts the volume level of the output from the output
and headphone jacks.
3.
OUTPUT R/L (MONO) Jacks
Connect to your amp, mixer, or such device.
4.
PHONES Jack
Connect headphones here.
5.
SEND/RETURN Jacks
When using LOOP (p. 50), connect these to external
effects processors.
6.
AMP CONTROL Jack
When using the AMP CONTROL function, connect to
the jack used for switching guitar amp channels.
7.
SUB EXP PEDAL/SUB CTL 1, 2 Jack
Connect an optional expression pedal (such as the EV-
5) or foot switch (such as the FS-6/FS-5U) here.
8.
DIGITAL OUT Connector
Outputs digital audio signals.
9.
MIDI IN/OUT Connectors
Connect an external MIDI device to these connectors to
transmit and receive MIDI messages.
10.
POWER Switch
Turns the power on and off.
11.
AC IN (AC Adaptor) Jack
Connect the included AC adaptor (BRC series) here.
12.
Cord Hook
Hook the AC adaptor cord here to prevent the adaptor
plug from being disconnected.
12
1 2 3 4 5 6 7 8 9 10 11 12