Editing Individual Items Of Sequencer Data (Microscope); Editing Sequencer Data (Basic Procedure In The Microscope) - Roland Fantom G8 User Manual

Editing Songs
Editing Individual Items of
Sequencer Data
(Microscope)
Microscope lets you edit individual items of sequencer data recorded
in a phrase, such as MIDI messages.
Editing Sequencer Data
(Basic Procedure in the Microscope)
Access the Microscope screen when you want to view the sequencer
data recorded in a phrase. Each line indicates the location (measure-
beat-tick) at which the sequencer data is recorded, and the data
recorded at that location.
1.
Access the Phrase Edit screen (p. 238).
2.
Press [F4 (Microscope)].
The Microscope screen will appear.
Use / to view the performance data.
fig.19-026.j
MIDI channel
Location of the performance data
(Measure – Beat – Tick)
F-key operations in the Microscope screen
F-key Explanation
F1 Inserts data.
Create
F2 Erases data.
Erase
F3 Moves data.
Move
F4 Copies data.
Copy
F5 Pastes the copied data.
Place
F6 Switches the display of the piano roll.
F7 Switches the part whose data is displayed.
Channel
F8 Selects the data that is displayed.
View
3.
You can press [F6 (
roll.
250
Indicates the parameter data
at the cursor location
Part Group
INT
EXP1
EXP2
EXT
Performance data
Page
p. 252
p. 252
p. 253
p. 253
p. 253
p. 250
p. 250
p. 252
)] to switch the display of the piano
4.
Press [F7 (Channel)] to select the part whose performance
data you want to view or edit.
Choose "ALL" if you want to view performance data of all
MIDI channels.
Channel: ALL, 1–16
Part Group: ALL, INT, EXP1, EXP2, EXT
In order to make efficient use of the display space in the screen,
locations in which no performance data exists are normally not
shown.
For an explanation of the various types of performance data,
refer to "Sequencer Data Handled by Phrases" (p. 251) .
5.
When you've finished editing, press [F8 (Close)].
6.
Use / to select the performance data that you want
to edit.
7.
Use / to select the parameter that you want to edit.
8.
Turn the VALUE dial or use [INC] [DEC] to change the value.
Notes, the note name (note number) of polyphonic aftertouch
data, and the on-velocity or off-velocity of a note can also be
specified by pressing a note on the keyboard.
If you press [ENTER], the performance data currently indicated
by " " will be transmitted from the MIDI OUT connector. In
the case of a note message, pressing [ENTER] will sound that
note.
If you're editing a system exclusive message, refer to "Editing a
system exclusive message" on the following page.
9.
Repeat steps 3 through 8 to edit the data.
10. To close the Microscope screen, press [EXIT].
You can Undo the result of editing (p. 217).