Roland Fantom G8 User Manual page 298

System Settings (Settings Common to All Modes)
How Do I Adjust the Volume?
MASTER LEVEL adjusts the volume of both the OUTPUT A
jacks and the DIGITAL AUDIO OUT jack. The front panel
VOLUME knob adjusts only the volume of the OUTPUT A
jacks. Here's an explanation of what you need to adjust
depending on the output jacks you're using.
fig.25-003_50
Sound Generator
(OUTPUT A
in the Routing screen)
Master Level
OUTPUT A (MIX)/PHONES
DIGITAL AUDIO OUT
When using the OUTPUT A jacks:
adjust using the VOLUME knob
The front panel VOLUME knob controls the volume of the
OUTPUT A jacks. This means that if you're outputting from the
OUTPUT A jacks, the simplest way is to leave the Master Level
fixed at 127 (the default setting), and use the VOLUME knob to
control the volume.
When using the DIGITAL AUDIO OUT jack:
adjust using Master Level
Master Level controls both the OUTPUT A jacks and the
DIGITAL AUDIO OUT jack. This means that if you're
outputting from DIGITAL OUT, use Master Level to adjust the
volume.
The Master Level setting is temporary, and will be lost
when you turn off the power. If you want to keep the
Master Level setting you edited, save the master level in
the internal system memory. → "Saving the System
Settings (System Write)" (p. 290)
298
Volume knob
Output Gain
This adjusts the output gain from the Fantom-G's Analog Out and
Digital Out. When, for example, there are relatively few voices being
sounded, boosting the output gain can let you attain the most
suitable output level for recording and other purposes.
Value: -12– +12
Mix/Parallel
Specifies how the sound of the entire Fantom-G will be output.
Value
MIX: Set this to have the collective output of all sounds output from
the OUTPUT A (MIX) jacks. When you want to check the final
overall sound being output, set to MIX.
Sounds which are set in the respective Output Assign to be
output from the INDIVIDUAL 3 jack are output from the left
OUTPUT A (MIX) jack; sounds which are set to be output from
the INDIVIDUAL 4 jack are output from the right OUTPUT A
(MIX) jack.
Sounds output from the PHONES jack are the same as those
output from the OUTPUT A (MIX) jacks. Therefore, any sounds
set with Output Assign to be output from the OUTPUT B jacks
is not output from the PHONES jack. Be sure to have any sound
you want to hear through the headphones set to "MIX."
PARALLEL: Output according to each Output Assign settings.
Master Key Shift
Shifts the overall pitch of the Fantom-G in semitone steps.
Value: -24– +24
Patch Remain (Patch Remain Switch)
Specifies whether currently sounding notes will continue sounding
when another patch or rhythm set is selected (ON), or not (OFF).
Value: OFF, ON
* When in Studio mode: Depending on the effect settings, currently
sounding notes may not remain in some cases.
* When in Single mode or Live mode: The Patch Remain function is
valid only for the most recently selected sound. Notes of a sound
selected earlier may be interrupted.
* The Patch Remain setting does not apply to sounds of an expansion
board.
Control Remain (Control Remain Switch)
Specifies whether changes in the sound and volume produced by
received MIDI data such as volume and pan (CC 5, 7, 10, 65, 68, 71–
74, RPN 0, 1, 2, MONO ON, POLY ON) and by the various
controllers will be maintained (ON) or not maintained (OFF) when
you select another patch or rhythm set.
Value: OFF, ON