Functions In The Studio Play Screen; Switching The Displayed Part Group; Selecting A Studio Set - Roland Fantom G8 User Manual

Functions in the Studio Play
Screen
fig.08-002.j
1 2
5
Number Explanation
Indicates the current sound generator mode.
1
Indicates the on/off status of each effect.
2
PFX Patch multi-effect
MFX1 Multi-effect 1
MFX2 Multi-effect 2
IFX Input effect
CHO Chorus
REV Reverb
MAS Mastering effect
Indicates the current location of the song, and the
3
status of the sequencer.
The Menu/Exit/Shortcut buttons for the USB
4
mouse.
Indicates/selects the bank, number, and name of the
5
currently selected studio set.
Indicates/selects the part group, part number, bank,
6
number, and name of the patch, rhythm set, or sam-
ple set for the current part.
Accesses the mixer screen.
7
Indicates the pad mode.
8

Switching the Displayed Part Group

In addition to the internal (internal sound generator) parts, the
Studio Play screen allows you to switch the view to see audio tracks,
expansion board parts, or external MIDI output parts.
1.
Press [STUDIO] to access the Studio Play screen.
2.
Press the [F7 ] or [F8
screen to left or right, selecting the part group that is
displayed.
Part group Explanation
Audio Track Audio tracks in the song
Internal Internal (internal sound generator)
EXP 1 Expansion board 1
EXP 2 Expansion board 2
External External MIDI output
You can switch the part group by holding down [SHIFT] and
pressing or .
3 4
8
6
7
Page
p. 39
p. 150
p. 205
p. 26
p. 67
p. 68
p. 69
p. 188
] key several times to move the
Playing in Studio Mode

Selecting a Studio Set

The Fantom-G has two studio set banks, including the User bank
and Preset banks.
USER
This is the bank inside the Fantom-G which can be rewritten. Studio
Sets you create can be stored in this bank. You can store 128 studio
sets.
PRST (Preset)
This is the bank inside the Fantom-G which cannot be rewritten.
However you may modify the settings of the currently selected
studio set, and then store the modified studio set in User memory.
The Fantom-G contains 8 preset studio sets.
1.
Press [STUDIO].
2.
Press [CURSOR] to move the cursor to the studio set bank.
fig.08-003.e
Studio set bank
Studio set number
3.
Turn the VALUE dial, or press [INC] [DEC] to select a studio
set bank.
USER: User
PRST: Preset
4.
Press [CURSOR] to move the cursor to the studio set
number.
5.
Turn the VALUE dial or press [INC] [DEC] to select the
studio set number.
67