Specifying The Time Signature (Time Signature); Editing A Style In More Detail (Style Microscope) - Roland Workstation GW-8 Supplementary Manual

Creating a New Style
Specifying the Time Signature
(Time Signature)
This function specifies the time signature of the Style.
1. In the "Style Edit Menu," select "12. Time Signature" and
press [ENTER].
The STYLE EDIT TIME SIGNATURE screen will appear.
2. Use [ ] [ ] [ ] [
parameter you want to change, and use the VALUE dial to
make the desired setting.
Parameter Value
INTRO,
MAIN,
DIVISION FILL,
ENDING,
ALL
VARIATION
OFF, ON
SW (1–4)
1–32/2,
Time Signature
4, 8, 16
3. Select "EXECUTE" and then press [ENTER].
It is not possible to restore the data to its original state after
executing this operation.
20
] to move the cursor to the
Explanation
Selects the division.
Selects the division number.
You may select more than
one.
If DIVISION is set to ALL,
this will be ON for all
switches 1–4.
* You can't execute the
function if nothing is
selected here.
Specifies the time signature.
Editing a Style in More Detail
(STYLE MICROSCOPE)
MICROSCOPE lets you edit individual items of the
performance data recorded in the Style, such as notes or
velocities.
You can individually edit the following items.
• An event's position
• Note number
• Note gate time
• Note-on velocity
1. Select a Style (p. 26 in Owner's Manual).
2. Press [MENU] so the button is lit.
3. Use [ ] [ ] to select "Style Composer," and press
[ENTER].
The STYLE COMPOSER screen will appear.
4. Use [ ] [ ] [ ] [
want to edit, and press [ENTER].
The STYLE COMPOSER ZOOM screen will appear.
5. Use [ ] [ ] [ ] [
"MICRO," and press [ENTER].
The STYLE MICROSCOPE screen will appear.
1
1
4
• Controller number
• Controller value
• Program change number
• Pitch bend value
] to select the division that you
] to move the cursor to
2
3
5