Changing The Midi Channel (Change Channel) - Roland Fantom G8 User Manual

Editing Songs
Changing the MIDI Channel
(Change Channel)
This function transfers the MIDI channel of a specified area of
sequencer data into a different MIDI channel.
For details on the settings, refer to "Phrase Modify Menu" (p.
239).
Part Group
Specifies the Part Group.
Value
Internal
EXP1
EXP2
External
ALL
Measure, For (Edit Range)
Specifies the range of measures in which the MIDI channel will be
changed. If you set "For" to "ALL," all measures will be specified.
Status
Selects the type of data for which you wish to change the MIDI
channel.
Value
ALL
NOTE
Poly Aftertouch
Control Change
Program Change
Channel Aftertouch
Pitch Bend
Range Min, Range Max
If you have set the Status parameter to "NOTE," "P.AFT," "C.C," or
"PROG," you can specify the range of data. Set "Range Min" to the
lowest value of the range, and "Range Max" to the highest value of
the range.
To change the MIDI channel of all notes or polyphonic
aftertouch data, set "Range Min" to "C -1" and "Range Max" to
"G9." To change the MIDI channel of C4, set "Range Min" and
"Range Max" to "C4." To change C3 through C4," set "Range
Min" to "C3" and "Range Max" to "C4."
• To change the MIDI channel of all controller numbers, set
"Range Min" to "0" and "Range Max" to "127." To change the
MIDI channel of all program numbers, set "Range Min" to "1"
and "Range Max" to "128." To change number 4, set "Range
Min" and "Range Max" to "4." To change numbers 3 through
14, set "Range Min" to "3" and "Range Max" to "14."
246
Explanation
Internal (internal sound generator)
Expansion board 1
Expansion board 2
External MIDI output
All part group
Src Channel, Dst Channel (MIDI Channel)
Set Src Channel to the MIDI channel that you want to change, and
set Dst Channel to the MIDI channel to which it will be changed.
If you have selected ALL for the source MIDI channel, the sequencer
data of all MIDI channels will be combined into the destination MIDI
channel.
Value: ALL, 1–16
It is not possible to select "ALL" for the destination MIDI
channel.