System Configuration Menu - Oki MC560n User Manual

System configuration menu

ITEM
Pow Save Time
Personality
USB PS Protocol
Clrable Warning
Auto Continue
Manual Timeout
Wait Timeout
Low Toner
Jam Recovery
CHOICE
5
15
30
60
240
AUTO
EMULATION
PCL
IBM PPR III XL
EPSON FX
PS3
EMULATION
RAW
ASCII
ONLINE
JOB
ON/OFF
OFF
30 sec
60 sec
5~40~300
OFF
CONTINUE
STOP
ON/OFF
Configuring your machine > 53
DESCRIPTION
Adjusts the idling time before the
printer automatically switches into
power saving mode. In this mode
power consumption is reduced to a low
level required to just keep the printer
operating and ready to receive data.
When a job is sent the MFP will require
a warm-up time of up to 1 minute
before printing can begin.
This item selects which industry
standard emulation your MFP should
use. When set to AUTO, incoming data
is examined and the correct emulation
is automatically selected each time a
print job is received.
Selects PostScript data format for USB
port.
When ONLINE, non-critical warnings,
such as requests for a different paper
size, can be cleared by pressing the ON
LINE button. When set to JOB, they are
cleared when the print job resumes.
Determines whether or not the MFP will
automatically recover from a memory
overflow condition.
Specifies how many seconds the MFP
will wait for paper to be fed before
cancelling the job.
Specifies how many seconds the MFP
will wait when received data pauses
before forcing a page eject. In
PostScript Emulation mode the job will
be cancelled if timeout occurs.
Specifies whether the MFP should
continue printing even after a low toner
condition is detected.
Specifies whether the MFP should
perform jam recovery after a paper jam
has occurred. If ON, the MFP will
attempt to print again any pages lost
due to a paper jam once the jam has
been cleared.