Setting The Driver Device Options - Oki MC560n User Manual

2. In the driver's [Setup] tab, click [Save...].
PCL Recall Saved Settings_oda.jpg
3. Enter a meaningful name for the settings you are saving,
and click [OK].
R
ECALLING SAVED DRIVER SETTINGS
1. In the driver's [Setup] tab, choose any previously saved
[driver settings] you need.
2. Proceed to make any other adjustments for this job, as
described in the relevant section in this manual.
S
ETTING THE DRIVER DEVICE OPTIONS
This section explains how to ensure that your printer driver can
utilize all of the hardware features installed in your MFP.
Accessories such as hard disk, duplex unit (two sided printing),
additional paper trays, etc., will only be usable if the printer
driver on your computer knows they are there.
In some cases the hardware configuration of your MFP is
automatically detected when the driver is installed. However, it is
advisable to at least check whether all of the available hardware
features are listed in the driver.
This procedure is essential if you subsequently add extra
hardware features to your MFP after the drivers have been
installed and set up.
A guide to printing > 184