Oki MC560n User Manual page 42

Management
NOTE
1. The Management selection is blocked by a password.
Since the machine is shipped without a specific
password, it is recommended that the administrator
create a new password to ensure security.
2. Security settings by default are set to "Off". You can
enable the following security settings:
> Copy: restricts the use of the copy function only.
> Copy+Scan to: restricts the use of the copy and scan
functions.
> Fax: restricts the use of the fax function only.
> Fax+Copy: restricts the use of the fax and copy
functions.
> Fax+Copy+Scan to: restricts the use of the fax, copy
and scan functions.
It is recommended that the administrator create a new 4 to 6
digit PIN. When the security feature is enabled the user will
be prompted to enter the PIN.
ITEM
Date/Time
Password
Add "To" Address
Pin Setting
Power Save
DESCRIPTION OR CHOICE
Enter the current date and time.
Enter new password if the administrator wishes to change
the password. (Up to 8 alphabetical or numerical digits
are allowed to be entered in this field. When entering
alphabetical digits, note that they are case-sensitive.)
If "On" is selected, when finishing sending an e-mail,
there will be a dialog box inquiring whether the user
wishes to add the new e-mail address to the machine's
address book.
Choice: On, Off.
Choice: Off, Copy, Copy + Scan to, Fax, Fax+Copy,
Fax+Copy+Scan to.
Note: The PIN ID input screen is indicated at the time of
"PIN Setting=Enable".
Enter four to six digits for your pin ID. A PIN ID under four
digits will be denied.
Enable / Disable.
Configuring your machine > 42