Table of Contents
Advertisement
MFP profile yourself using profile creation software, select
it here.
NOTE
If you have selected your own output profile (4), you will also
be able to adjust the rendering intent.
intents" on page 210.
S
IMULATING ANOTHER PRINTER
The Graphic Pro color matching system can be used to simulate
the color output of another printer.
graphicpro-RGBmatch.eps
1
1. RGB data
3. RGB source profile
5. Printer output profile
NOTES
1. Be aware that if the device you are trying to simulate has
different color capabilities from your own MFP, exact
color simulation will not be possible. For example, it may
be difficult to reproduce the exact colors of an ink jet
printer on a toner-based printer.
2. Additionally, differences in the range of printable colors
between different devices can make simulation using
RGB source data inaccurate. To achieve best results
when simulating the color output of other printers, you
are strongly advised to use CMYK data as a source. See
"CMYK ink simulations - CMYK source data" on page
- RGB
2
5
2. Printed document
4. Scanner, monitor, camera, etc.
6. Leave on Auto or select your custom profile.
A guide to printing > 205
See "Rendering
SOURCE DATA
3
6
4
207.
Advertisement
Chapters
Table of Contents
