Table of Contents
Advertisement
4.
If required, press Return to go back to the fax screen.
5.
Press the Mono button (7) to send your document(s).
NOTE
1. Fax transmissions are sent in black and white only.
2. If you make a mistake during the transmission process,
press the STOP button (8) to cancel the operation.
Manual redial
Control menu faxbasic_oda.jpg
Press the Redial button (9) on the control panel to display the
fax number of the last transmission (successful or not), then
press the Mono button (6) to send a fax to this number.
Receiving a Fax
Your MFP is set to receive faxes automatically, if you wish to
change this to manual receive refer
page 70
for details.
NOTE
If the MFP is in use, i.e. sending a fax or scanning, then any
incoming faxes will be rejected.
During other functional operations, for example copying,
filing, e-mailing, etc., then any incoming faxes will be stored
and printed out when the MFP is available.
to"Manual receive" on
Operation > 93
Advertisement
Chapters
Table of Contents
