Oki MC560n User Manual page 31

network devices to find the MFP on the network, the following
network parameters have to be set.
1. DHCP enable:
2. IP Address: .
3. Subnet mask:.
4. Gateway IP:.
5. DNS server:.
6. SMTP server:.
7. SMTP port:25
8. POP3 server: .
9. POP3 Port:110
Explanation:
1. DHCP Enable:
Choose Yes to obtain IP/subnet/gateway addresses
automatically from DHCP server. After changing setting
from Disable to Enable, switch scanner module power OFF
then ON.
2. IP Address:
The Internet Protocol (IP) address assigned to your
machine by your network administrator.
3. Subnet Mask:
The net mask address assigned by your network
administrator.
4. Gateway IP:
The gateway IP address assigned by your network
administrator.
. .
. .
. .
. .
. .
. .
Configuring your machine > 31