ITEM
Tray Sequence
MP Tray Usage
Media Check
Resolution
Toner Save Mode
CHOICE
DOWN
UP
PAPER FEED
TRAY
DO NOT USE
WHEN
MISMATCH
ENABLE
DISABLE
600x1200DPI
600DPI M-
Level
600DPI
OFF/ON
Configuring your machine > 47
DESCRIPTION
Determines tray sequence order when
automatically switching.
If a document to be printed demands a
paper size not installed in the selected
tray, the MFP can automatically feed
from the multi purpose tray instead. If
this function is not enabled, the MFP will
stop and request the correct size of
paper to be loaded.
Determines whether the MFP check the
size of paper loaded matches that
required for the document sent to print.
Sets the default resolution for printing
(dots per inch). 600x1200DPI uses
more memory and requires more time
to process, but prints at a higher
quality.
Reduces the amount of toner used for
imaging. Toner saving gives lighter
prints but is more economical.