Table of Contents
Advertisement
MFP profile yourself using profile creation software, select
it here.
NOTE
If you have selected your own output profile (4), you will also
be able to adjust the rendering intent.
intents" on page 212.
S
IMULATING ANOTHER PRINTER
The Graphic Pro colour matching system can be used to simulate
the colour output of another printer.
1
1. RGB data
3. RGB source profile
5. Printer output profile
NOTES
1. Be aware that if the device you are trying to simulate has
different colour capabilities from your own MFP, exact
colour simulation will not be possible. For example, it
may be difficult to reproduce the exact colours of an ink
jet printer on a toner-based printer.
2. Additionally, differences in the range of printable colours
between different devices can make simulation using
RGB source data inaccurate. To achieve best results
when simulating the colour output of other printers, you
are strongly advised to use CMYK data as a source. See
"CMYK ink simulations - CMYK source data" on page
- RGB
2
5
2. Printed document
4. Scanner, monitor, camera, etc.
6. Leave on Auto or select your custom profile.
A guide to printing > 207
See "Rendering
SOURCE DATA
3
6
4
210.
Advertisement
Table of Contents
