Speaker Setup - Marantz SR5004 User Manual

2 SPEAKER SETUP

After you have installed the unit connected all the
components and determined the speaker layout, it
is now time to perform the settings in the Speaker
Setup menu for the optimum sound acoustics for
your environment and speaker layout.
Before you perform the following settings, it is
important that you fi rst determine the following
characteristics:
• Auto Setup:
"2-1 AUTO SETUP (Audyssey MultEQ ® )"
(see page 28)
• Manual Setup:
"2-2 MANUAL SETUP" (see page 31)
1.
Select "Speaker Setup" from the Main
Menu with 3 or 4 cursor buttons and press
the ENTER button.
2.
Select the desired menu with the 3 or
4 cursor buttons, and press the ENTER
button.
Note
• After you complete this the portion of the setup,
press the 3, 4, 1, and 2 cursor button. The
cursor will move to "Return" and press the
ENTER button to go to the Sub-menu.
Speaker Setup
Auto Setup
Manual Setup
Return
: Up / Down : Enter : Select Exit : Exit
☞
P. 28
Audyssey MultEQ Setup Audyssey MultEQ Setup
StartManual Setup Now Analyzing!!
Front Height
: Yes
Surround Back : 2ch Cancel
Return
: Up / Down : Enter : OK Exit : Exit : :
Audyssey MultEQ Setup Audyssey MultEQ Setup
Speaker Check : - - --------------
1st Mic Position Now Calculating!
Now Analyzing!!
Cancel
: : Enter : OK Exit : Exit : :
Audyssey MultEQ Setup Check Result
Speakers Config
Speaker Check : OK
Speakers Size
2nd Mic Position
Speakers Distance
Start Channel Level
Check Crossover Frequency
Calculate Store
: Up / Down : Enter : OK Exit : Exit : Up / Down :
☞
P. 31
Manual Setup
Speakers Size
Speakers Distance
Speakers Level
Return
: Up / Down : Enter : Select Exit : Exit
Speakers Size
Subwoofer : Yes
Front : Small
Front Height : Small
Center : Small
Surround : Small
Surround Back : 2ch
Surround Back Size : Small
LPF / HPF : 80Hz
Bass Mix : * * *
Return
Enter : OK Exit : Exit : Up / Down : Change Enter : Exit : Exit
Speakers Distance
Unit : Feet
Front Left : 10.0 ft
Front Height Left : 10.0 ft
Center : 10.0 ft
Front Height Right : 10.0 ft
Front Right : 10.0 ft
Surround Right : 10.0 ft
Surround Back Right : 10.0 ft
Surround Back Left : 10.0 ft
Surround Left : 10.0 ft
Subwoofer : 10.0 ft
Return
Enter : Exit : : Up / Down : Change Enter : Exit : Exit
Speakers Level
Test ModeFront Left : Manual
Front Left : 0.0dB
Front Height Left : 0.0dB
Center : 0.0dB
Front Height Right : 0.0dB
Front Right : 0.0dB
Surround Right : 0.0dB
Surround Back Right : 0.0dB
Surround Back Left : 0.0dB
Surround Left : 0.0dB
Subwoofer : 0.0dB
Return
Enter : Select Exit : Exit : Up / Down : Change Enter : Exit : Exit
ENGLISH
SETUP
2-1 AUTO SETUP (AUDYSSEY MULTEQ
AUTO SETUP (performed by Audyssey MultEQ)
automatically measures the acoustical problems in
the listening environment and optimizes settings to
create the best audio experience for your listening
environment.
Audyssey MultEQ removes frequency response
anomalies caused by the interaction of sound from
loudspeakers within the room. This results in the
playback of sound as it was intended, without
coloration, not just in one seat, but over a large
listening area.
Audyssey MultEQ measures up to 6 listening
positions in the room, detects the presence of each
speaker, and automatically calculates the speaker
size, channel level, distance, and optimal crossover
frequency settings.
To set up the speaker system (i.e., adjusting speaker
distance, etc.) without using the AUTO SETUP
feature, see "MANUAL SETUP" on page 31 of the
manual.
® )
27