Speaker Setup - Marantz SR4400 User Manual

Notes:
• When a DTS-LD or DTS-CD is playing, this setup
is not available. This is to avoid noise being
generated from the analog input.
• If "Dx-AUTO" is selected and a DVD, compact
disc or LD is fast forwarded during playback,
decoded signals may produce a skipping sound. In
such cases, change the setting to DIGITAL.
• Same digital input function cannot be set. In this
case, the previous setting is set to ANALOG.
Same digital input number cannot be set in Digital
AUTO mode and Digital Fixed mode. For
example, D1AUTO and DIG.1 are not set at same
time.

2. SPEAKER SETUP

After you have installed the SR4400, connected all
the components, and determined the speaker
layout, it is now time to
perform the settings in the Speaker Setup menu
for the optimum sound acoustics for your
environment and speaker layout.
Before you perform the following settings, it is
important that you first determine the following
characteristics:
SPEAKER SIZE
When setting the speaker size in the SPEAKER
SIZE sub-menu, use the guidelines given below.
Large:
The complete frequency range for the channel
you are setting will be output from the speaker.
Small:
Frequencies of the channel you are setting
lower than approx. 100Hz will be output from the
subwoofer.
If the Subwoofer is set to "NONE" and the front
speakers are set to "Large," then the sound may
be output from both the left and right speakers.
AUX AMP
TV MAIN
4. 6.
VOL. SLEEP MUTE VOL.
OSD MENU
1. 3. 5.
OK
2. 6.
SETUP/ MENU OFF
T.TONE
S-DIRECT AUTO DTS
1 2 3
NIGHT CSII EX/ES DSP
4 5 6
1.
Select "2.SPEAKER" in SETUP MAIN MENU
with or cursor button,
2.
Press the OK button to enter the menu. The
first sub-menu item is "Speaker Size" setup.
3.
Press or cursor button to select the each
speaker.
4.
Press or cursor button to select the setting
of size to each speaker.
5.
If you finish these setup, press the
cursor button to select "NEXT".
MENU STRUCTURE of Speaker Size setup
Speaker
2.SPEAKER SUBW
Speaker Size
setup
L & R
CENTER
SL & SR
SURR.B
NEXT EXIT
Speaker Distance exit SETUP
setup
MENU
6.
Press the OK button to enter the next
"Speaker Distance" setup.
Or press the or cursor button to select
"EXIT" then press the OK button to exit the
SETUP MENU.
Or press the or cursor button to select "TO
MAIN MENU" then press the OK button to
return the SETUP MAIN MENU.
or
Size
YES
Select when a subwoofer is connected.
NONE Select when a subwoofer is not connected.
SMALL Select if the front speakers are small sized.
LARGE
Select if the front speakers are large sized.
SMALL Select if the center speaker is small sized.
LARGE
Select if the center speaker is large sized.
NONE Select if no center speaker is connected.
SMALL Select if the surround left and right speakers are small sized.
LARGE
Select if the surround left and right speakers are large sized.
NONE Select if no surround left and right speakers are connected.
YES Select when a surround back speaker is connected.
NONE
Select when a surround back speaker is not connected.
TO MAIN
MENU
MAIN MENU
SPEAKER DISTANCE
Use this parameter to specify the distance of each
speaker's position from the listening position. The
delay time is automatically calculated according to
these distances.
Begin by determining the ideal or most commonly
used seating position in the room.
This is important for the timing of the acoustics to
create the proper sound space that the SR4400
and today's sound systems are able to produce.
Note that the speakers that you selected "None"
for in the Speaker Config sub-menu will not appear
here.
AUX AMP
TV MAIN
3. 5.
VOL. SLEEP MUTE VOL.
OSD MENU
2. 4.
OK
5.
SETUP/
MENU OFF
T.TONE
S-DIRECT AUTO DTS
1 2 3
NIGHT CSII EX/ES DSP
4 5 6
1.
Enter to the "Speaker Distance setup" from
the previous "Speaker Size setup".
2.
Press or cursor button to select the each
speaker.
3.
Press or cursor button to set the distance
from your listening position for each speaker.
4.
After finishing the Speaker Distance setup,
press the or cursor button to select
"NEXT".
5.
Press the OK button to enter the next
"Speaker Level" setup.
Or press the or cursor button to select
"EXIT" then press the OK button to exit the
SETUP MENU.
Or press the or cursor button to select "TO
MAIN MENU" then press the OK button to
return the SETUP MAIN MENU.
Or press the or cursor button to select
"RETURN" then press the OK button to return
the previous "Speaker Distance" setup.
17