Marantz SR5004 User Manual page 77

CLEARING MACRO PROGRAMS
The following procedure is used to erase macros
you have programmed into the remote controller's
memory.
3.
1.
2.
2.
1.
Press and hold the MACRO and MENU
button until the LEARN, MACRO indicators
and MACRO are displayed blinking on the
LCD.
2.
Press and hold the CL button, then press
the button for the numeric button to be
cleared for 3 seconds. (in this case "2")
• M2-CL will be displayed blinking on the
LCD.
3.
Press the ENTER button to clear and return
step 1.
• To cancel the memory clearing operation,
do not press ENTER button and simply
touch any other button.
4.
To return the normal mode, press and
hold down the ENTER button until MACRO
indicator is disappeared on the LCD and
returns to normal mode.
ADJUSTING THE INTERVAL TIME OF
MACRO OPERATIONS TRANSMITTING
1.
4.
3.
1.
1.
Press and hold the MACRO and SETUP
button until the SETUP is displayed on the
LCD.
• SETUP is displayed for 3 seconds.
2.
Confi rm the display changes from SETUP
to MCRxx. ("xx" means the interval time of
macro operations transmitting)
3.
Press the cursor button (1 or 2) to change
the interval time.
• The interval time can be changed from
0.5 to 5 seconds by 0.5 seconds step.
4.
Press and hold down the ENTER button
until MACRO indicator is disappeared on
the LCD and returns to normal mode.
ENGLISH
ADVANCED OPERATION
75