Surround Setup - Marantz SR5004 User Manual

3 SURROUND SETUP

This menu is for setting surround effect parameters
for the various surround input signals so as to bring
out the live audio effect of your speaker system.
1.
Select "Surround Setup" from the Main
Menu with the 3 or 4 cursor buttons and
press the ENTER button.
2.
Select the desired menu with the 3 or
4 cursor buttons and press the ENTER
button.
• Channel level:
"3-1 CHANNEL LEVEL" (see page 33)
• PLIIx Music Parameter:
"3-2 PLIIx MUSIC PARAMETER" (see page 34)
• CSII Parameter:
"3-3 CSII PARAMETER" (see page 34)
• NEO:6 Parameter:
"3-4 NEO:6 PARAMETER" (see page 34)
• HT-EQ:
Select to active the HT-EQ with the 1 or 2 cursor
buttons.
The total balance of a film soundtrack will be
excessively bright and harsh when played back over
audio equipment in the home. This is because fi lm
soundtracks were designed to be played back in
large movie theater environments.
Activating the HT-EQ feature when watching a fi lm
made for movie theaters corrects this and restores
the correct tonal balance.
The HT-EQ feature is available except in the following
modes.
• 7.1 CH INPUT
• PURE DIRECT
• SOURCE DIRECT
• Dolby Head Phone
• When VIRTUAL is set for the surround mode
• LFE Level:
Select the output level of the LFE signal included in
the Dolby Digital signal or the DTS signal.
Select "0dB", "–10 dB" or "OFF" with the 1 or 2
cursor button.
• M-DAX:
Select the desired M-DAX mode.
Select "High", "Low" or "Off" with the 1 or 2
cursor button. (See page 41)
After you complete this portion of the setup, move
the cursor to "Return" with the 3, 4 cursor buttons
and press the ENTER button.
Surround Setup
Channel Level
PL x Music Parameter
CS Parameter
NEO: 6 Parameter
HT-EQ : Off
LFE Level : 0dB
M-DAX
: Off
Return
: Up / Down : Enter : Select Exit : Exit
☞
P. 33
Channel Level
Surround Mode
: Auto
Front Height Left : 0.0dB
Center : 0.0dB
Front Height Right : 0.0dB
Surround Right
: 0.0dB
Surround Back Right : 0.0dB
Surround Back Left : 0.0dB
Surround Left : 0.0dB
Subwoofer
: 0.0dB
Return
: Up / Down : Change Enter : Exit : Exit
☞
P. 34
PL x Music Parameter
ParameterCenter
: Default
Panorama : Off
Dimension : 0
Center Width : 3
Return
: Up / Down : Change Enter : Exit : Exit
☞
P. 34
CS Parameter
TrubassCenter : 0
SRS Dialog
: 0
Return
: Up / Down : Change Enter : Exit : Exit
☞
P. 34
NEO: 6 Parameter
Center Gain : 0.3
Return
: Up / Down : Change Enter : Exit : Exit
3-1 CHANNEL LEVEL
1.
Select "Surround Setup" from Main Menu
with 3 or 4 cursor buttons and press the
ENTER button.
2.
Select "Channel Level" with the 3 or
4 cursor buttons and press the ENTER
button.
3.
Set the Surround Mode with the 1 or 2
cursor buttons.
Channel Level
Surround Mode : Auto
Front Height Left : 0.0dB
Center
: 0.0dB
Front Height Right : 0.0dB
Surround Right : 0.0dB
Surround Back Right : 0.0dB
Surround Back Left
: 0.0dB
Surround Left : 0.0dB
Subwoofer : 0.0dB
Return
: Up / Down : Change Enter : Exit : Exit
4.
Select the desired menu item with the 3 or
4 cursor buttons, set the desired level with
the 1 or 2 cursor buttons, and press the
ENTER button.
Surround Mode:
The surround mode can be independently set for
3 modes.
1. Multi Ch STEREO
2. CSII
3. Others
CHANNEL LEVEL
Center:
Set the effect level of the center speaker between
–12 and +12 level in 0.5 level interval .
• If "None" was selected for the center speaker
setting in the Speaker Size, then this setting will
not appear.
Surround Left or Right:
Set the effect level of the Surround speaker between
–12 and +12 level in 0.5 level interval .
• If "None" was selected for the surround speakers
setting in the Speaker Size, then this setting will
not appear.
ENGLISH
SETUP
Surround Back Left or Right:
Set the effect level of the Surround Back speaker
between –12 and +12 level in 0.5 level interval .
• If "None" was selected for the surround back
speakers setting in the Speaker Size, then this
setting will not appear.
Front Height Left or Right:
Set the effect level of the front height speaker
between –12 and +12 level in 0.5 level interval .
• If "None" was selected for the front height
speakers setting in the Speaker Size, then this
setting will not appear.
Subwoofer:
Set the effect level of the subwoofer speaker
between –18 and +12 level in 0.5 level interval .
• If "No" was selected for the subwoofer speaker
setting in the Speaker Size, then this setting will
not appear.
Note
• Setting to a mode other than multichannel stereo
or CSII will affect the speaker level as explained
in "2-2 MANUAL SETUP".
After you complete this portion of the setup, move
the cursor to "Return" with the 3 or 4 cursor
buttons and press the ENTER button to go to the
Surround Setup menu.
33