Preference - Marantz SR5004 User Manual

ENGLISH
SETUP

5 PREFERENCE

1.
Select "Preference" from Main Menu with
the 3 or 4 cursor buttons and press the
ENTER button.
2.
Select the desired menu with the 3 or
4 cursor buttons and press the ENTER
button.
• Zone A Setup :
"5-1 ZONE SETUP" (see page 36)
• Zone B Setup :
"5-1 ZONE SETUP" (see page 36)
• DC Trigger Setup :
"5-2 DC TRIGGER SETUP" (see page 37)
• Optical:
Select when using equipment with optical digital
output.
Rec: Select when recording to a CD recorder or
MD recorder. (See page 12)
Zone B: Select when using ZONE B. (See pages 21,
65)
• Standby Mode:
When this is set to "Economy", you can reduce the
power consumption when the unit is in the Standby
mode. When "Economy" is selected, "RS-232C"
is disabled when the unit is in the Standby mode.
• Audio:
In the Audio mode, Dolby Digital and DTS output
is set to either "Main" or "Sub". Select "Audio"
with the 1 or 2 cursor buttons, then select Main ↔
Sub ↔ Main+Sub with the 1 or 2 cursor buttons.
• HDMI Audio:
This setting determines whether to play back audio
input to the HDMI jacks through the unit or output it
through the unit to a TV or projector.
Enable: The audio input to the HDMI jacks can
be played back by this unit.
In such case, audio signals are not
output to the TV or projector.
Through: The audio input to the HDMI jacks is not
output from the speaker terminals of
the unit. Audio data is output directly to
the TV or projector. This setting is used
to listen to audio on a multi channel TV,
etc.
36
• HDMI Lip Sync:
Video signals may take longer to process than
audio signals depending on the connected video
equipment.
When the unit is connected to TV or Projector
supporting Auto Lipsync Correction in HDMI 1.3a,
audio and video can be automatically synchronized
using this function.
Use the 1 or 2 cursor buttons to switch between
Enable and Disable.
Enable: Auto Lipsync Correction is used to
synchronize audio and video.
Disable: Deactivates this function.
Notes
• This function is not available when the unit is
connected to equipment that does not support
HDMI 1.3a or Auto Lipsync Correction. For
details, check the userʼs manual of the connected
equipment.
• If this function is unavailable, you can use the
regular Lipsync function to synchronize audio
and video. (See page 43)
After you complete this portion of the setup, move
the cursor to "Return" with the 3 or 4 cursor
buttons and press the ENTER button.
Preference
Zone A Setup
Zone B Setup
DC Trigger Setup
: Rec
Optical
Standby Mode : Normal
Audio : Main
HDMI Audio : Enable
: Disable
HDMI Lip Sync
Return
: Up / Down : Enter : Select Exit : Exit
Zone A Setup
: BLU-RAY
Audio Source
: Off
Sleep Timer
Stereo / Mono. : Stereo
Zone Pre Out : Off
Volume Mode : Variable
: -90dB
Level
Zone Speaker Out : * * *
Volume Mode : * * *
Level : * * *
Return
: Up / Down : Change Enter : Exit : Exit
Zone B Setup
: BLU-RAY (Dig.-)
Audio Source
Sleep Timer : Off
Zone Digital Out : Off
Return
: Up / Down : Change Enter : Exit : Exit
SR6004
DC Trigger Setup
TriggerSystem Error!!
: Disable
BLU-RAY : * * *
DVD : * * *
VCR : * * *
DSS
: * * *
TV : * * *
CD/CDR : * * *
7.1ch Input : * * *
M-XPort : * * *
Tuner
: * * *
USB Audio : * * *
Return
: Up / Down : Change Enter : Exit : Exit
SR5004
DC Trigger Setup
TriggerSystem Error!! : Disable
BLU-RAY : * * *
DVD : * * *
VCR
: * * *
DSS : * * *
TV : * * *
CD/CDR : * * *
7.1ch Input
: * * *
M-XPort : * * *
Tuner : * * *
Return
: Up / Down : Change Enter : Exit : Exit
5-1 ZONE SETUP
This unit has source selectors, sleep timers,
zonespeaker output, and remote controller for the
two other ZONEs in the ZONE system.
These features can be set from this menu.
1.
Select "Preference" from the Main Menu
with the 3 or 4 cursor buttons and press
the ENTER button.
2.
Select "Zone A Setup" or "Zone B Setup"
with the 3 or 4 cursor buttons.
3.
Press the ENTER button to enter the
setting.
The following explanation shows how to operate
ZONE A of the ZONE system.
Zone A Setup
Audio Source : BLU-RAY
: Off
Sleep Timer
: Stereo
Stereo / Mono.
Zone Pre Out : Off
Volume Mode : Variable
: -90dB
Level
: * * *
Zone Speaker Out
Volume Mode : * * *
Level : * * *
Return
: Up / Down : Change Enter : Exit : Exit
The following explanation shows how to operate
ZONE B of the ZONE system.
Zone B Setup
Audio Source : BLU-RAY(Dig.-)
: Off
Sleep Timer
: Off
Zone Digital Out
Return
: Up / Down : Change Enter : Exit : Exit
4.
Select the desired item with the 3 or 4
cursor button.
Audio Source:
Select the audio source of the ZONE output with the
1 or 2 cursor buttons.