Marantz SR5004 User Manual page 54

ENGLISH
ADVANCED OPERATION
3.
Adjust the antenna location until signal
strength is good or excellent.
4.
Select channel 0 (SR000) with the 3 or 4
cursor button of the unit or the remote
controller.
4.
4.
• The Radio ID is displayed.
S R O O O : S i r i u s I D
Notes
• I f " A N T E N N A " , " T U N E R E R R " o r
"ACQUIRING" appears in the front panel display,
see Troubleshooting (page 82).
• To change the display content from SIRIUS
information to unit functions, do so from the
display mode. (See "DISPLAY MODE" on page
40)
52
SWITCHING SIRIUS INFORMATION IN THE
FRONT PANEL DISPLAY
You can display SIRIUS information (such as artist
name, song title, composer name, category or
signal status) for the channel currently selected in
the front panel display.
1.
2.
1.
Press the TUNE button on the remote
controller.
2.
Select the information with the T.DISP
button.
Channel number/name
Artist name/Song title
Channel number/name
Composer name
Channel number/name
Category
Satellite signal status
Terrestrial signal status
Channel number/name
Surround mode
When the Channel number/name mode is
displayed:
S R 0 2 4 :
(If text is more than 14 characters long, the text is
scrolled.)
When the Artist name/Song title is displayed:
N A M E / T I T L E
P i n k F l o i d /
F l o i d / M o n e y
When the Composer name is displayed:
C O M P O S E R
R o g e r W a t e r
The "NAME / TITLE" or "COMPOSER" is displayed
for 2 seconds, followed by the artist name / Song
title or Composer name.
(If artist name / song title or composer name is more
than 14 characters long, the text is scrolled.)
When the channel category is displayed:
C A T : R o c k
This SIRIUS information can also be displayed on a
TV monitor connected to the unit.
1.
2.
3.
4.
1.
Press the AMP button on the remote
controller.
2.
Press the INFO button. The following
information will be displayed.
V I D E O : D V D
A U D I O : S I R I U S
S U R R - M O D E : A U T O
Z O N E A : O N S P K : O F F
Z O N E B : O F F
M A I N V O L U M E
- - - - - - - - - - - - - - - - - - -
3.
When this display appears, press the INFO
button again. SIRIUS information like the
following will appear.
S I R I U S I N F O R M A T I O N
S I R I U S : 0 0 7
C H A N : 7 0 s H i t s
C A T : P o p
N A M E : 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6
T I T L E : 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6
C M P O S R : 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6
S A T : E X C E L L E N T
T E R R : W E A K
4.
Press the INFO button again. The
information display will go out.
Note
• If the information contains a character that
cannot be recognized by that unit, the character
will be displayed with " "(space).