Setup; Speaker Setup - Marantz SR3053 User Manual

SETUP

SPEAKER SETUP

After you have installed the unit, connected all the
components, and determined the speaker layout, it
is now time to perform the settings in the Speaker
Setup menu for the optimum sound acoustics for
your environment and speaker layout.
Before you perform the following settings, it is
important that you fi rst determine the following
characteristics:
After all components are connected, initial setup
must be performed.
1.
Press the AMP button of the remote controller.
(This step is not needed when operating the
setup menus from the unit itself.)
2.
Press the MENU button on the remote
controller or the unit.
3.
Select a desired sub-menu with the 3 or 4
cursor buttons, and press the ENTER button
to enter. The display will change to the
selected sub-menu. You can move the each
sub-menu with the 1 or 2 buttons.
4.
If you desire to exit from this menu system,
press the EXIT button.
3, 4, 1, 2,
MENU EXIT
ENTER
MENU
SIZE
DISTANCE
16
Press MENU button.
MENU
3, 4, 1, 2,
ENTER
EXIT
LEVEL
LEVEL
3 / 4 button 1 / 2 button
ENTER button
SPK LEVEL
FL
CT
FR
SR
SL
SW
SIZE
1 / 2 button
ENTER button
FRNT
SPK SIZE
CNTR
SURR
SUB
DISTANCE
1 / 2 button
ENTER button
SPK DIST UNIT
FRNT
CNTR
SURR
SUB
Press LEVEL button on the remote controller.
3 / 4 button
+10dB Maximum
1dB interval
+9dB
0dB
-9dB
1dB interval
-10dB Minimum
Press SIZE button on the remote controller.
3 / 4 button
SML
LRG
SML
LRG
NONE
SML
LRG
NONE
YES
NONE
Press DISTANCE button on the remote controller.
3 / 4 button
FT
M
3 / 4 button
Maximum
30FT (9.0M)
29FT (8.7M)
1foot (0.3m)
interval
2FT (0.6M)
Minimum
1FT (0.3M)