Setting Up The Channel And Favorite Channel Lists - Insignia NS-42E859A11 User Manual

Using Your TV
68
NS-32E859A11/NS-42E859A11
Press or to highlight Cable (without a box) or
5
Antenna, then press SELECT. The Channel Scan starts.
• If you are using an antenna for a standard or HDTV
signal, select Antenna.
• If your cable is connected directly to the TV (using no
cable box), select Cable (without a box).
Scan for Channels
Your TV works with either cable or antenna channels. Select the TV
signal you have connected to this TV. The TV will then begin scanning
for channels, which may take up to 30 minutes.
You only need to scan for channels for cable if you are NOT
using a cable box. If you have a cable box (or a satellite box), the box
already has information about your channels
Antenna
Cable (without a box)
If your cable or satellite TV is connected to your TV through
a cable or satellite box, the channel search is not necessary
because the cable or satellite box already has the channel
information needed to communicate with your TV.
Note
You can press CLEAR, MENU, or EXIT to stop the
channel scan, but you will need to run the channel
scan again to create a channel list.
Setting up the channel and favorite channel
lists
You can add, hide, or mark favorite channels in the channel list.
To set up the channel and favorite channel lists:
Press TiVo. The Home screen opens. Press
1
Settings, then press
Press or
2
10:00pm
Home
Settings
Connect to the Internet
Press or
3
or SELECT.
Appearance
Audio
Channels & providers
Devices
Network
Recommendations
Video
www.insigniaproducts.com
or
or SELECT.
to highlight Settings, then press
Settings
Parental Controls
Check for updates
Account & system info
Help
Sleep timer
to highlight Channels & providers, then press
Settings
Channel list
Scan for channels
Signal strength
to select
or SELECT.
10:00pm
10:00 PM