Insignia NS-42E859A11 User Manual page 34

Getting Started
30
NS-32E859A11/NS-42E859A11
Press or to highlight Devices, then press
3
Settings
Appearance
INlink HDMI control
Audio Source sensor
Channels & providers Remote control setup
Devices TV power on
Network Reset device settings
Recommendations
Video
Press or to highlight Remote control setup, then press
4
or SELECT. If your remote control is not in RF mode,
follow the on-screen instructions to switch to RF mode.
Settings
Appearance
INlink HDMI control
Audio
Source sensor
Channels & providers
Remote control setup
Devices Devices
TV power on
Network
Reset device settings
Recommendations
Video
or SELECT. Press or
5
control that you want to program (DVD, STB, or AUX), then
press or SELECT.
10:00 PM
DVD button
STB button
AUX button
Power button in TV mode
Volume button
Backlight
Reset all remote settings
6 Press or
with the button you are programming, then press
SELECT and follow the on-screen instructions.
10:00 PM
Set up the remote control to
Select the device you would like to control when you press the DVD
control the devices that you use button on the remote control.
with this TV, like your cable box,
DVR, or DVD player.
DVD
VCR
7 Repeatedly press to highlight the list of brands, press
to highlight the brand of your device, then press SELECT.
Note
You can narrow down the brand or model number
list by entering the first one or two letters or numbers
of your device brand and model number using the
on-screen keyboard.
www.insigniaproducts.com
to highlight the mode button on your remote
Remote Control Setup
Set up the DVD button on your
remote to control your device.
to highlight the device you want to control
Step 1: Select Device
Remote Control Setup (DVD button)
10:00 PM
or
10:00pm
or