Connecting A Dvi Device - Insignia NS-42E859A11 User Manual

Connecting a DVI device

Note
A DVI device must be connected to the HDMI/DVI
jack. If you connect a DVI device to another HDMI
jack, you will not hear audio.
To connect a DVI device:
Make sure that your TV's power cord is unplugged and the
1
DVI device is turned off.
Connect an HDMI-DVI adapter (not provided) to one end of
2
an HDMI cable (not provided), then connect the adapter to
the DVI OUT jack on the DVI device.
Connect the other end of the HDMI cable to the HDMI/DVI
3
jack on the side of your TV.
Connect an audio cable to the PC/DVI Audio In jack on the
4
side of your TV and to the AUDIO OUT jack on the DVI
device.
DVI device
Side of TV
www.insigniaproducts.com
NS-32E859A11/NS-42E859A11
To play from a DVI device:
Turn on your TV.
1
2 Turn on the DVI device, then set it to the correct output
mode. See the documentation that came with the device for
more information.
Press INPUT to open the input source list.
3
Press or to highlight HDMI 4, then press SELECT.
4
Note
If the source sensor is turned on, the inputs that do
not have devices connected are grayed in the input
source list. When you press INPUT, your TV moves
between the inputs that have devices connected.
You can select a grayed input by pressing
more information, see "Turning the source sensor on
or off" on page 95.
Getting Started
or . For
21