Programming Your Universal Insignia Remote Control - Insignia NS-42E859A11 User Manual

The Date and Time Setup screen opens. Press
8
highlight Use this date and time, then press SELECT.
OR
Press or to highlight Set date and time manually, then
press SELECT and follow the on-screen instructions to set
your time zone, daylight saving option, and date and time.
Date and Time Setup
If the date and time are not correct, you may manually set them.
The current date and time are:
12/12/2010 at 10:00 PM Eastern Standard Time
Use this date and time
Set date and time manually
9 The Congratulations screen opens. Press TiVo to enjoy your
new TV.
Congratulations!
You TV is now set up.
Press TIVO at any time to access the TV's menu and On Demand shows.
Press LIVE at any time to watch television.
Enjoy your new TV!
Press TIVO to continue
If you skipped the channel scan in Step 6 because you are
10
using a cable or satellite TV box, your TV switches to the
active input source that you connected the cable or satellite
box to before displaying the Home menu.
or to Programming your universal Insignia remote
control
Note
To use the on-screen setup for your remote control,
the remote control must be in RF mode. If the remote
control is not in RF mode, the RF Remote Control
Required screen opens when you try to enter the
Remote control setup menu. Follow the on-screen
instructions to switch your remote control to RF
mode.
Programming the mode buttons
You can program the mode buttons on your TV remote control
(DVD, STB, or AUX) to control the corresponding device using
your TV remote control.
To program the mode buttons:
Press TiVo. The Home screen opens. Press
1
Settings, then press
Press or
2
Home
Settings
Connect to the Internet
www.insigniaproducts.com
NS-32E859A11/NS-42E859A11 Getting Started
or
or SELECT.
to highlight Settings, then press
Settings
Parental Controls
Check for updates
Account & system info
Help
Sleep timer
to select
or SELECT.
10:00pm
29