Insignia NS-42E859A11 User Manual page 91

Manually
To set up the wired connection manually:
Press TiVo. The Home screen opens. Press
1
Connect to the Internet, then press
Home
Settings
Connect to the Internet
When Go to network settings is highlighted, press SELECT.
2
Home
Settings
Connect to the Internet
or to highlight
or SELECT.
10:00pm
Connect this TV to your home network and
Internet connection in order to access TV and
movies on demand and play web videos.
Simply plug an Ethernet cable into the back of
the TV or configure it to work with your
wireless network.
Go to Network Settings
10:00 PM
Connect this TV to your home network and
Internet connection in order to access TV
and movies on demand and play web
videos. Simply plug an Ethernet cable into
the back of the TV or configure it to work
with your wireless network.
Go to network settings
www.insigniaproducts.com
NS-32E859A11/NS-42E859A11
Press or to highlight Change network settings, then
3
press SELECT.
Ethernet Connection Found
An active wired Ethernet connection was detected. Your TV
has been set up to use this connection.
Select "Continue" to keep this setting (recommended), or choose "Change
network settings" to manually set up and verify your network settings.
Continue
Change network settings
Press or to highlight Get automatically from a DHCP
4
server (typical), then press SELECT.
Network IP Address
If your home network uses DHCP, choose "Get automatically from a DHCP
server." If your home network does not use DHCP, set a static IP address.
Get automatically from a DHCP server (typical)
Let me specify a static IP address
OR
Using Your TV
10:00 PM
10:00 PM
87