Insignia NS-42E859A11 User Manual page 35

Repeatedly press to highlight the list of models, press
8
to highlight the model number of your device, then press
SELECT.
Follow the on-screen instruction to test the remote control
9
on the device.
Step 4: Test Setup
Remote Control Setup (DVD button)
Now we will test to see if the remote can control your DVD (or other
device).
1. Turn ON the DVD (or other device).
2. Point the remote at the DVD (or other device).
3. The remote will try to turn the device OFF.
Start test
Press or to highlight Yes, continue, then press SELECT.
10
Step 4: Test Setup
Remote Control Setup (DVD button)
Did the device turn OFF ?
To confirm that the remote fully controls the DVD (or other device),
turn ON the device and then try the following buttons on the remote control:
1. Play
2. Stop
Does the remote reliably control the device?
Yes, continue
No
or Press or
11
this button, then press SELECT. When you press the mode
button, your TV switches to the input source you selected
for the device.
If you do not want to switch to the input source you selected
for the device when you press the mode button, select
I don't want to automatically switch inputs, then press
SELECT.
10:00pm
If the DVD (or other device) is connected to one of the inputs of this TV,
the TV will automatically change to that input when you press the DVD
button on the remote control.
HDMI 1 (no device)
HDMI 2 (no device)
HDMI 3 (no device)
HDMI 4 (no device)
Component/Composite (no device)
VGA (no device)
I don't want to automatically switch inputs
Press or
12
off when you press the power button in this mode, then
press SELECT. A check mark appears next to the selected
10:00pm device. Press
press SELECT.
Choose all of the devices you want to turn on and off when you press the
power button on the remote control while it is in DVD mode.
Use these settings
TV
Set-top box
AUX
www.insigniaproducts.com
NS-32E859A11/NS-42E859A11 Getting Started
to highlight the input jack you want to assign to
Step 5: Select Input
Remote Control Setup (DVD button)
to highlight the device you want to turn on and
or to highlight Use these settings, then
Step 6: Power Button in DVD Mode
Remote Control Setup (DVD button)
10:00pm
10:00pm
31