Changing Channel Settings; Automatically Scanning For Channels - Insignia NS-42E859A11 User Manual

Changing channel settings

Automatically scanning for channels

When you scan for channels, your TV searches for channels with
signals and stores the channel information in the channel list.
When you press CH or CH , your TV goes to the next or
previous channel in the channel list.
If the TV signal source changes, for example you change from
an outdoor antenna to cable TV (no box), you need to scan for
channels.
Note
If you are using a cable box or satellite TV box, you do
not have to scan for channels.
To automatically scan for channels:
1 Press TiVo. The Home screen opens. Press
Settings, then press or SELECT.
Press or to highlight Settings, then press
2
Home
Settings
Connect to the Internet
3
or to select
4
or SELECT.
10:00pm
Settings
Parental Controls
Check for updates
Account & system info
Help
Sleep timer
www.insigniaproducts.com
NS-32E859A11/NS-42E859A11
Press or to highlight Channels & providers, then press
or SELECT.
Settings
Appearance Channel list
Audio
Scan for channels
Channels & providers
Signal strength
Devices
Network
Recommendations
Video
Press or to highlight Scan for channels, then press
SELECT.
Settings
Appearance
Channel list
Audio
Scan for channels
Channels & providers Channels & providers
Signal strength
Devices
Network
Recommendations
Video
Using Your TV
10:00 PM
or
10:00 PM
Set up your cable or antenna
channels and check signal quality.
Current setting:
Antenna
67