Front; Side - Insignia NS-42E859A11 User Manual

Front

CH GAME
# Button Description
1
Remote control sensor Receives signals from the remote control. Do not block.
Detects the ambient light conditions to optimize the picture
2
Ambient light sensor
brightness for optimum viewing and provides energy savings.
Lights blue when your TV is turned on.
Depending on the TV power on mode you select, lights red or purple
3 Power indicator
when your TV is in standby mode. For more information, see "Setting
the TV power on mode" on page 93.
Lights when the logo feature is turned on. For more information, see
4
INSIGNIA logo
"Adjusting the INSIGNIA logo brightness" on page 92.
5
VOL /VOL Press to decrease or increase the volume.
Press to go to the previous or next channel. For more information, see
6
CH /CH
"Selecting a channel" on page 37.
Press to use the Game mode feature for optimal performance while
7 GAME
playing games.
Press to open input source list. For more information, see "Selecting
8 INPUT
the video input source" on page 35.
9 MENU Press to open the on-screen menu. Press again to close the menu.
Press to turn on your TV. Press again to put your TV in standby mode.
10
(power) When your TV is in standby mode, power still flows through it. To
completely disconnect power, unplug the power cord.

Side

CH GAME
# Jack
1
2
3
4
5
6
7
8
www.insigniaproducts.com
NS-32E859A11/NS-42E859A11
Description
Insert a Rocketboost Wireless card (RF-RBCARD, sold seperately) to wirelessly
Rocketboost connect Rocketboost audio products to your TV. For more information, see
"Setting up Rocketboost™" on page 51.
Connect headphones to this jack. For more information, see "Connecting
Headphone
headphones" on page 25.
Connect an analog sound system to this jack to send the TV audio through the
Audio Out
sound system. See "Connecting an analog audio receiver" on page 26.
Connect the video for a computer to this jack. For more information, see
PC/VGA
"Connecting a computer" on page 24.
Connect the audio for a computer or DVI device to this jack. For more
PC/DVI Audio In information, see "Connecting a computer" on page 24 or "Connecting a DVI
device" on page 21.
Connect HDMI devices to these jacks. An HDMI cable carries both video and
sound. You do not need to make an audio connection for an HDMI device.
HDMI jacks
For more information, see "Connecting an HDMI device" on page 20.
USB/Service Port For service only. Do not use.
Connect a device that has RS232 controls, such as a connected soundbar. By
INc doing this your TV remote control will be able to control the soundbar's
volume.
Getting Started
13