Removal and Replacement Procedures
5. Disconnect the TouchPad cable 1 from the LIF connector on
the system board (Figure 5-24).
6. Remove the four black PM1.5 × 5.0 screws 2 and the
PM2.0 × 5.5 screw 3 that secure the top cover to the base
enclosure.
7. Lift the top cover straight up 4 and remove it from the base
enclosure.
Figure 5-24. Removing the Top Cover
Reverse the above procedure to install the top cover.
5.15 PC Card Assembly
PC Card assembly
5–32
PC Card Assembly
Spare Part Number Information
Maintenance and Service Guide
253936-001