Removal and Replacement Procedures
2. Remove the four PM2.0 × 4.5 screws 1 that secure the
keyboard support plate to the base enclosure (Figure 5-29).
3. Lift the left side of the plate and slide the plate to the right 2
until it clears the base enclosure, then lift the plate straight
up 3 and remove it from the base enclosure.
Figure 5-29. Removing the Keyboard Support Plate
Reverse the above procedure to install the keyboard support plate.
5.19 Speaker Assembly
The speaker assembly is included in the base enclosure (spare
part number 260611-001).
1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
a. LED cover (Section 5.8)
b. Keyboard (Section 5.9)
5–40
Maintenance and Service Guide