Compaq Evo N180 Maintenance And Service Manual page 105

1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
a. LED cover (Section 5.8)
b. Keyboard (Section 5.9)
c. Heat sink (Section 5.10)
d. Display (Section 5.13)
e. Top cover (Section 5.14)
2. Remove the two PM2.0 × 5.5 screws 1 that secure the
PC Card assembly to the base enclosure (Figure 5-25).
3. Lift the rear/right corner 2 of the assembly to disconnect it
from the system board.
4. Remove the PC Card assembly 3.
Figure 5-25. Removing the PC Card Assembly
Maintenance and Service Guide
Removal and Replacement Procedures
5–33