c. Heat sink (Section 5.10)
d. Display (Section 5.13)
e. Top cover (Section 5.14)
f.
g. Charger board (Section 5.16)
2. Disconnect the speaker cable 1 from the audio board
(Figure 5-30).
3. Lift the speaker assembly straight up 2 and remove it from
the base enclosure.
Figure 5-30. Removing the Speaker Assembly
Reverse the above procedure to install the speaker assembly.
Maintenance and Service Guide
PC Card assembly (Section 5.15)
Removal and Replacement Procedures
5–41