Compaq Evo N180 Maintenance And Service Manual page 106

Hp evo n180: supplementary guide
Hide thumbs Also See for Evo N180:
Table of Contents

Advertisement

Removal and Replacement Procedures
5. Remove the two PM1.5 × 8.0 screws 1 and the two
PM1.5 × 4.0 screws 2 that secure the PC Card assembly
shield to the PC Card assembly (Figure 5-26).
6. Remove the PC Card assembly shield from the
PC Card assembly.
The PC Card assembly shield is included in the Hardware Kit
(spare part number 253937-001).
Figure 5-26. Removing the PC Card Assembly Shield
Reverse the above procedure to install the PC Card assembly.
5–34
Maintenance and Service Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Evo n180 series

Table of Contents