Static Routing - TRENDnet TW100-BRV304 - Advanced VPN Firewall Router User Manual

TW100-BRV304 User Guide
Data - Routing Screen
RIP
Enable RIP

Static Routing

Static Routing
Table Entries
Properties
Figure 95: Routing Screen
Check this to enable the RIP (Routing Information Protocol) feature
of the TW100-BRV304.
The TW100-BRV304 supports RIP 1 only.
This list shows all entries in the Routing Table.
•
The "Properties" area shows details of the selected item in the
list.
•
Change any the properties as required, then click the "Update"
button to save the changes to the selected entry.
•
Destination Network - The network address of the remote LAN
segment. For standard class "C" LANs, the network address is
the first 3 fields of the Destination IP Address. The 4th (last)
field can be left at 0.
•
Network Mask - The Network Mask for the remote LAN
segment. For class "C" networks, the default mask is
255.255.255.0
•
Gateway IP Address - The IP Address of the Gateway or
Router which the TW100-BRV304 must use to communicate
with the destination above. (NOT the router attached to the re-
mote segment.)
•
Metric - The number of "hops" (routers) to pass through to
reach the remote LAN segment. The shortest path will be used.
The default value is 1.
112