Table of Contents
Advertisement
TW100-BRV304 User Guide
General Settings
Policy Name
Enable Policy
Remote VPN
Endpoint
Keys
2. Click Next to continue. You will see a screen like the following:
Figure 49: VPN Wizard - General
Enter a suitable name. This name is not supplied to the remote VPN. It is
used only to help you manage the policies.
Enable or disable the policy as required. For each remote VPN, only 1
policy can be enabled at any time.
The Internet IP address of the remote VPN endpoint (Gateway or client).
•
Dynamic. Select this if the Internet IP address is unknown. In this
case, only incoming connections are possible.
•
Fixed. Select this if the remote endpoint has a fixed Internet IP
address.
Select Manually assigned or IKE (Internet Key Exchange) as required.
If you are setting up both endpoints, using IKE is recommended.
74
Advertisement
Table of Contents
